This drawer cabinet features partial-drawout drawers with ball-bearing guides, a stop, and a closing mechanism. The unit measures 770 x 1035 x 650 mm (width x height x depth), with an azurite blue front and a light grey beech core body featuring finger-joint gluing and a lacquered oil finish.

This industrial workbench features a 40 mm thick solid beech tabletop with rounded front edges and a powder-coated steel frame in light grey. It includes five drawers with 90% pull-out ball-bearing slides, an integrated cylinder lock, and a blue front panel.

This electronically adjustable workbench features a 22 cm thick rectangular tabletop with a lift range of 38 mm/s. It includes an integrated control unit with memory buttons for height settings and operates via two hydraulic columns with linear drives for synchronous, noise-free adjustment even under uneven loads.

This height-adjustable workbench features a light gray tabletop and frame constructed from profile steel tubes with integrated depth bracing and adjustable feet. The unit includes three drawers and is designed for industrial use with options for retrofitting caster wheels.

This height-adjustable desk features a 25 cm thick rectangular top in light grey with a beech wood finish. It includes an electronic stepless height adjustment system with a control unit, four memory buttons, and a digital height display.

This workbench features a light grey welded steel frame with profile steel tube legs and cross-bracing for stability. The unit includes anti-slip foot pads and is prepared for optional height adjustment or caster installation.

This height-adjustable workbench features a control unit with up/down buttons that allows for a vertical adjustment speed of 38 mm/s under no load. The system operates with a duty cycle of 10% and consumes only 0.1 W in standby mode.

This tool wall accessory set for RAU workbenches or tables includes a mounting set with four system columns, three perforated plates, an etage board, a tiltable metal shelf, a flat screen holder, a cardboard magazine, extension arms, running rails, a trolley, and an LED workplace light. The set is designed for use with specific RAU workbenches or tables of the same width and features adjustable installation height within the system columns.

This height-adjustable workbench features a 40 mm thick solid beech top and a powder-coated steel frame in light grey with an azurite blue front. It includes a 1,700 x 620 x 650 mm underframe container with a 90% pull-out drawer and a 360 mm high door, all equipped with ErgoScript® handle strips.

This industrial work cart features a beech wood top with finger-joint gluing and a rounded front edge, finished with linseed oil for natural protection. It includes two swivel casters and two fixed legs, each mounted on welded wheel plates with 125 mm diameter wheels featuring grey thermoplastic rubber treads.

This steel tool wall accessory set includes a mounting kit with cross beams and two adjustable aluminum system columns for attachment to compatible RAU workbenches. The assembly features a melamine-coated shelf, a perforated plate for modular accessories, and a rail for open storage boxes, all finished in light gray powder coating.

This height-adjustable workbench features a solid beech top with rounded front edges and a powder-coated steel frame designed for heavy-duty use. It includes eight drawers with 90% pull-out ball-bearing runners, a wing door with an adjustable shelf, and integrated leveling feet with anti-slip pads.

This steel roll container features two partial-drawout drawers with an enzian blue front and light gray body. The unit measures 480 x 690 x 600 mm in width, height, and depth.

This height-adjustable workbench features a 40 mm thick solid beech top with a radius front edge and a powder-coated steel frame. The unit supports a maximum load of 1,250 kg and includes integrated leveling feet with anti-slip pads and a grid for optional caster installation.

This height-adjustable workbench features a 40 mm thick solid beech top with a radius front edge and a powder-coated steel frame. It includes an undercarriage container, a 90% pull-out drawer with ErgoScript® handle strips, and feet equipped with leveling and anti-slip pads.

This industrial workbench features a 40 mm thick solid beech top with rounded front edges and a powder-coated fine sheet metal body in light gray. It includes ten drawers with 90% pull-out ball-bearing runners, an integrated ErgoScript® handle strip, and a maximum load capacity of 1,000 kg.

This solid beech workbench features a 40 mm thick top and a powder-coated steel frame in light grey, with an azur blue front. It includes five 90% pull-out drawers with ErgoScript® handles and an integrated height-adjustable vice mounted on a lift mechanism for ergonomic access.

This mobile workbench features a beech slat top with finger-joint gluing and a rounded front edge, finished with linseed oil for natural protection. It includes two swivel casters and two fixed casters with 125 mm thermoplastic rubber wheels, a push handle on the right side, and a document pocket.

Dicke der Tischplatte: 40 mmmax. Tragfähigkeit: 1.250 kghöhenverstellbarArt der Schließung: ZylinderschlossMaterial der Platte: Buche, massivWerkstoff des Korpus: Feinblech, pulverbeschichtetMaterial des Gestells: Stahl, pulverbeschichtetFarbe der Front: enzianblauFarbe des Korpus: lichtgrau Buchen-Riegel mit Keilzinken-Verleimung. Vorderkante mit Radius, andere Kanten gefast. 4-Fuß Schweißgestell mit zwei Gestellfußpaaren aus Profil-Stahlrohr (45 x 45 x 2 mm) inkl. Tiefenverstrebungen (oben und unten). Gestellfüße unten mit integrierter Höhenverstellung/Höheneinstellung mittels Profil-Stahlrohr (40 x 40 x 2 mm) mit Lochraster (20 mm) sowie Abschlusselement inkl. Niveauausgleich und Anti-Rutsch-Noppe für sicheren Stand. Die Gestellfüße sind vorbereitet für die Aufnahme/Nachrüstung eines Rollensatzes. 1 Dreifach-Unterbau-Container, 1.700 x 620 x 650 mm (B x H x T). 2 Flügeltüren-Größe-L, Höhe 560 mm. Flügeltüren mit selbst zuziehenden Federscharnieren. Schublade-Größe-L, Innenmaß 490 x 560 mm (B x T). Die Nutzhöhe der Schublade entspricht der Fronthöhe abzgl. 15 mm. Rollengelagerte Teilauszugsschienen (Auszug 90 %) mit Selbsteinlauf und Rücklaufsicherung. Die Nutzhöhe der Schublade entspricht der Fronthöhe abzgl. 15 mm. Durchgehende Griffleiste ErgoScript®: Stahlblechbasis mit alufarbenem Overlay und integrierter Klarsichtabdeckung. Rau GmbH Im Rohrbach 14+16 72336 Balingen-Frommern Deutschland info@rau-gmbh.de

This industrial workbench features a 40 mm thick solid beech tabletop with rounded front edges and finger-jointed construction, supported by a powder-coated steel frame with height-adjustable legs. It includes four ball-bearing drawer slides with 90% pull-out capacity, an enzyan blue front finish, and integrated leveling feet with anti-slip pads for stability.

The RAU Werkbank 8000 is a height-adjustable workbench featuring a solid beech tabletop with a maximum load capacity of 1,250 kg. Its powder-coated steel frame includes integrated leg leveling and anti-slip feet, while the front panel is finished in teal blue.

erforderliches Zubehör: Rau Arbeitstisch Tom/Adlatus/900, Werkbank 7000/8000, Schubladenschrank 7000, Werkstattwagen 7000Produktverwendung: Verwendung nur bei gleicher Breite möglichMaterial: Stahl, pulverbeschichtetFarbe: lichtgrau Set bestehend aus: 1 Befestigungssatz (Querträger) mit 2 System-Stützen, 1 Lochplatte (450 mm hoch) mit 4-Kant Systemlochung (Lochung 10 x 10 mm, Abstand Lochmitte-Lochmitte 38 mm) zur Aufnahme von Lochplatten-Zubehör. 1 Etagenbord, melaminbeschichtet (300 mm tief). 1 Halteschiene für Aufnahme von Sichtlagerkästen (offene Einhängekante an der Rückseite der Sichtlagerkästen erforderlich). 1 Flachbildschirmhalter mit Montageadapter für Lochplatte (VESA MIS-D 75/100). 1 Kartonagenmagazin, melaminbeschichtet (600 mm tief), mit Montagekonsolen und vorne sowie hinten angebrachtem C-Profil zu variablen Positionierung der Steckbügel mittels Systembolzen. Einbauhöhe der Anbauelemente innerhalb der System-Stützen verstellbar. Der Befestigungssatz (Querträger) wird hinten unter der Arbeitsplatte an den Systemunterbau angebracht. Die 2 System-Stützen (Aluminiumprofil 40 x 40 mm) werden mittels Nutensteinen an den Befestigungssatz (Querträger) angeschraubt (Höhe einstellbar) und laufen hinter der Arbeitsplatte nach oben, so dass die gesamte Tiefe der Arbeitsplatte frei bleibt (kein Verschrauben auf der Arbeitsplatte). Die System-Stützen verfügen an allen 4 Seiten über eine Profilnut, so dass eine allseitige Nutzung möglich ist. Die 2 System-Stützen werden links und rechts außen angeschraubt, so dass 1 Systemfeld in der Systembreite entsteht. Rau GmbH Im Rohrbach 14+16 72336 Balingen-Frommern Deutschland info@rau-gmbh.de

This height-adjustable worktable features an oak top and a light gray frame with integrated control buttons. It offers a vertical adjustment range of 38 mm per step, operating via a single switch that allows for intermittent or continuous use while consuming minimal standby power.

This height-adjustable workbench features a light grey frame constructed from steel profile tubing with depth bracing and rear stiffening traverses. The unit is equipped with swivel casters that have a 125 mm diameter and a 150 mm build height, featuring grey thermoplastic rubber wheels.